How To Measure An Above Ground Pool Liner
Whether you have an in-ground swimming pool or an above ground swimming pool, you will have a liner. A liner is sturdy, durable, and regardless of its color or pattern, is primarily designed to hold the water inside your swimming pool. Of course, it is integral to the structure of your above ground swimming pool. Understanding the importance of the pool liner, there are a few different types available per size and shape, depending on your particular above ground swimming pool.
Types Of Liners
There are a variety of above ground pool liners available. Overlap liners fold over the lining of the pool and thus are clipped into place with coping strips. An overlap liner should be measured carefully and installed just as well because they can be very tricky. However, they are the most budget-friendly. Beaded liners, also known as snap bead liners or standard bead liners, have a bump around the edge. This bump tucks around a special track around the top of the pool wall.
The J-Hook liner is very simple to install compared to overlap and beaded liners. It connects to the top edge of your above ground pool with a thick rubber fold, and it requires no coping strips for security. Further, there are a variety of brand-specific liners that may be purchased with your above ground swimming pool. Be aware of these, especially if you are looking for something simple to install or take down after the season is over. Pool liner cost will vary.
- Round Above Ground Pools
The first step in measuring an above ground pool liner is understanding the shape of your pool. The most common shape for an above ground swimming pool is round. If you have a round above ground pool, grab your measuring tape – you’ll only need it to take two measurements. From separate locations, measure the inside of the pool at the bottom across to the other side at the same height. The bottom of the wall is best. It is important to remember that, for round pools, a round pool liner will have a flat bottom instead of a deeper middle.
- Oval Above Ground Pools
For another type of above ground swimming pool, the oval-shaped pool, you’ll do much the same as you would with a round pool. However, you will need to measure from the middle of the pool as well as at the ends. You also need to measure at the longest point from end to end. For the oval above ground swimming pool, measures will need to be touching the wall at the base.
It is vital to remember that, for an above ground swimming pool, a liner will be anywhere from 48 inches to 54 inches deep. When you are purchasing a standard-sized liner, these will come as 48, “ 52″, or 54″. A new above ground pool liner will always have room for sand, wedges, and a pool cove as they become necessary during installation on your property.
Measuring twice and purchasing the best liner once is crucial. However, if you aren’t sure what you are doing, it is always best to consult professionals. Seek out a professional in above ground pool supplies if you need help measuring your above ground pool liner so you can get the appropriate fit the first time.